Bongs - DIY

Build your own Bong with a Coffee Jar.

Equipment Needed :

• One empty jar of Nescafe Coffee (Big Size)
• Packet of Blue Tack
• 15mm Dia Copper pipe around 10 inches.
• Flexible hose around 12 inches 10mm wide.
• Masking Tape or Parcel Tape
• foil
• sewing needle
• Cooker
• Drill (optional)

Okay here goes simple instructions follow in stages. Light cooker, heat end of copper tube push through plastic lid of jar. (tip: remove paper insert from lid top). Push Pipe down until about 2 cm from bottom of jar and hold in place with loads of blue tack. Heat a knive or drill hole 10mm wide, insert flexible tubing. Seal with blue tack. Fill jar with 2/3 water. Wrap masking/packing tape around the lid and body of the Jar making sure to seal the lid and jar body airtight, overlap plenty of tape. Make a bowl by using a square of foil 3cm square. Place on end of copper pipe and push down with thumb. Pierce foil using a sewing needle or pin, make plenty of holes. make your mix, put on bowl and light, using the flexible tube suck and you should get a really nice draw.

Nescafe Jars have been recommended here but any jar will do we are not promoting Nescafe... ;-). Send us your pics of the jars you have built for our DIY gallery. diy@bongs.me.uk